Skip to content

Paintless dent repair · Factory paint stays on

The dent comes out. The paint stays on.

Door dings, hail and parking lot dents worked out from behind the panel in Randleman. Nothing filled, sanded or resprayed. Free quotes from a photo, before the car is here.

What you get

What comes out, and what does not.

  • Door dings

    The dimple left by the car parked too close, usually along the middle of a door.

  • Hail damage

    A hood or roof full of small round dents with the paint still whole.

  • Parking lot dents

    Cart hits and knee height dents in a door or a quarter panel.

  • Factory paint stays on

    The metal is worked back from behind the panel. Nothing is filled, sanded or resprayed.

  • Honest limits

    Cracked paint, a sharp crease, no access behind the panel, or filler under the paint means a different repair, and we say so first.

On the record

A dent shows up in the reflection.

Straight lines give a dent away. Photograph the panel at an angle with a door frame or a light bar reflected across it, and that one photo tells us more than a paragraph.

SuitsDoor dings, hail, parking lot dents
NeedsIntact paint and access behind the panel
PaintFactory paint stays on the car
Quoted onThe panel, and how deep the dent is
Suitability

What comes out, and what does not.

Paintless work needs two things: paint that is still intact, and a way in behind the panel. Send a photo and we will say which one yours is before you drive over.

Damage this suits

Door dingsThe dimple left by the car parked too close, usually along the middle of a door.
Hail damageA hood or a roof full of small round dents with the paint still whole.
Parking lot dentsCart hits and knee height dents in a door or a quarter panel.
Soft edged dentsA dent that rolls into the panel rather than folding it, with nothing broken through the clear coat.

Where it stops

Cracked or chipped paintOnce the paint is broken the panel needs refinishing. Paintless work moves metal, it does not put paint back.
A sharp creaseA crease stretches the metal. It can come a long way back and it will not read as untouched.
No access behind itSome dents sit over a brace or on the edge of a panel, where there is no way in from the back.
Filler under the paintA panel that has been repaired before does not move the way bare metal moves.
How it works
  1. Tell us about your vehicle

    Year, make, model and what you want done. It takes about a minute, and photos help.

  2. Get your free quote

    We price it for your vehicle and get back to you fast. No pressure, no surprises.

  3. Book your spot

    Pick a day that works, drop it off in Randleman, and drive away protected.

Questions
  • Can every dent be fixed paintless?

    No. It needs intact paint and a way in behind the panel. Cracked paint, a sharp crease or a dent over a brace becomes a different repair, and we say so before the car is booked.

  • Will the repair be invisible?

    Soft edged dents with whole paint usually come out clean. A crease stretches the metal. It can come a long way back, but it will not read as untouched.

  • How do I get a quote?

    Send the year, make and model with a photo of the dent taken at an angle in a reflection. We get back to you fast with a free quote, before the car is here.

  • Does it damage the paint?

    No. The metal is worked from behind. Nothing touches the finish with sandpaper or filler, so the factory paint stays on the car.

Where the cars come from

Paintless dent repair for every town we measured from the shop door. The minutes on each are the real drive.

Free quote

Get your free quote.

Tell us about your vehicle and what you want done. We will get back to you fast with a free, no pressure quote. Prefer to talk? Call us.

Prefer to call(336) 799-4326

Mon to Fri, 8 to 5
357 Branson Mill Road, Randleman, NC 27317

The vehicle
What you want done
How to reach you

Rather talk it through? (336) 799-4326

Sending this lets us call or text you back about this request, and nothing else. See the privacy policy.