Paintless dent repair · Kernersville, NC
Paintless dent repair for Kernersville drivers.
Door dings, hail and parking lot dents worked out from behind the panel in our Randleman shop, with the factory paint left on the car, for Kernersville owners. Kernersville is 27.4 miles from the shop, about 33 minutes on I-73 to US 421.
What comes out, and what does not.
Door dings
The dimple left by the car parked too close, usually along the middle of a door.
Hail damage
A hood or roof full of small round dents with the paint still whole.
Parking lot dents
Cart hits and knee height dents in a door or a quarter panel.
Factory paint stays on
The metal is worked back from behind the panel. Nothing is filled, sanded or resprayed.
Honest limits
Cracked paint, a sharp crease, no access behind the panel, or filler under the paint means a different repair, and we say so first.
A dent shows up in the reflection.
Straight lines give a dent away. Photograph the panel at an angle with a door frame or a light bar reflected across it, and that one photo tells us more than a paragraph.
Kernersville to the shop, measured.
Kernersville is a town on the Forsyth and Guilford county line, between Greensboro and Winston-Salem. US 421 and I-73 carry the drive south to the shop's exit.
Measured by road from the shop door, not estimated. Everything about the drive from Kernersville.
Tell us about your vehicle
Year, make, model and what you want done. It takes about a minute, and photos help.
Get your free quote
We price it for your vehicle and get back to you fast. No pressure, no surprises.
Book your spot
Pick a day that works, drop it off in Randleman, and drive away protected.
Can every dent be fixed paintless?
No. It needs intact paint and a way in behind the panel. Cracked paint, a sharp crease or a dent over a brace becomes a different repair, and we say so before the car is booked.
Will the repair be invisible?
Soft edged dents with whole paint usually come out clean. A crease stretches the metal. It can come a long way back, but it will not read as untouched.
How do I get a quote?
Send the year, make and model with a photo of the dent taken at an angle in a reflection. We get back to you fast with a free quote, before the car is here.
Does it damage the paint?
No. The metal is worked from behind. Nothing touches the finish with sandpaper or filler, so the factory paint stays on the car.
Do I need to bring the car to Randleman for a price?
Usually not. A reflection photo from Kernersville is enough to start. The repair itself is done in the shop, about 33 minutes away on I-73 to US 421.
Get your free quote.
Tell us about your vehicle and what you want done. We will get back to you fast with a free, no pressure quote. Prefer to talk? Call us.
Prefer to call(336) 799-4326