Paintless dent repair · Greensboro, NC
Paintless dent repair for Greensboro drivers.
Door dings, hail and parking lot dents worked out from behind the panel in our Randleman shop, with the factory paint left on the car, for Greensboro owners. Greensboro is 15.2 miles from the shop, about 20 minutes on I-73 and US 220 to Freeman Mill Road.
What comes out, and what does not.
Door dings
The dimple left by the car parked too close, usually along the middle of a door.
Hail damage
A hood or roof full of small round dents with the paint still whole.
Parking lot dents
Cart hits and knee height dents in a door or a quarter panel.
Factory paint stays on
The metal is worked back from behind the panel. Nothing is filled, sanded or resprayed.
Honest limits
Cracked paint, a sharp crease, no access behind the panel, or filler under the paint means a different repair, and we say so first.
A dent shows up in the reflection.
Straight lines give a dent away. Photograph the panel at an angle with a door frame or a light bar reflected across it, and that one photo tells us more than a paragraph.
Greensboro to the shop, measured.
Greensboro is the largest city in the Triad and the seat of Guilford County, north of Randleman. Freeman Mill Road feeds the I-73 and US 220 corridor south out of the city, and the shop is just off that corridor.
Measured by road from the shop door, not estimated. Everything about the drive from Greensboro.
Tell us about your vehicle
Year, make, model and what you want done. It takes about a minute, and photos help.
Get your free quote
We price it for your vehicle and get back to you fast. No pressure, no surprises.
Book your spot
Pick a day that works, drop it off in Randleman, and drive away protected.
Can every dent be fixed paintless?
No. It needs intact paint and a way in behind the panel. Cracked paint, a sharp crease or a dent over a brace becomes a different repair, and we say so before the car is booked.
Will the repair be invisible?
Soft edged dents with whole paint usually come out clean. A crease stretches the metal. It can come a long way back, but it will not read as untouched.
How do I get a quote?
Send the year, make and model with a photo of the dent taken at an angle in a reflection. We get back to you fast with a free quote, before the car is here.
Does it damage the paint?
No. The metal is worked from behind. Nothing touches the finish with sandpaper or filler, so the factory paint stays on the car.
Do I need to bring the car to Randleman for a price?
Usually not. A reflection photo from Greensboro is enough to start. The repair itself is done in the shop, about 20 minutes away on I-73 and US 220 to Freeman Mill Road.
Get your free quote.
Tell us about your vehicle and what you want done. We will get back to you fast with a free, no pressure quote. Prefer to talk? Call us.
Prefer to call(336) 799-4326